How to Install Motorola CP1660 Software on Your PC
How to Install Motorola CP1660 Software on Your PC
The Motorola CP1660 is a commercial portable two-way radio that offers a full keypad, built-in voice scrambling, DTMF signaling, VOX capability, and multi-channel functionality. It is ideal for light manufacturing, retail, hospitality services, property and real estate management. To program and customize your CP1660 radio, you need to install the Customer Programming Software (CPS) on your PC. Here are the steps to do that:
Motorola Cp1660 Install Iso
Download the CPS software from this link. This is the latest version (R02.01 Build 56) that supports some new Korean and Australian models. The file size is about 32 MB and it does not require a password.
Extract the zip file to a folder on your PC. You will see a setup.exe file and a readme.txt file.
Run the setup.exe file and follow the instructions on the screen. You will need to accept the license agreement and choose a destination folder for the installation.
After the installation is complete, you will see a shortcut icon for the CPS software on your desktop. Double-click it to launch the program.
Connect your CP1660 radio to your PC using a USB cable or a programming cable. Make sure the radio is turned on and in programming mode.
In the CPS software, click on Read Device to read the current settings of your radio. You can also click on Write Device to write new settings to your radio.
You can use the menu options and tabs to modify various parameters of your radio, such as frequencies, channels, tones, power levels, features, etc. You can also save and load profiles for different radios.
When you are done with your changes, click on Write Device again to save them to your radio. You can also click on Verify Device to check if the settings are correct.
Disconnect your radio from your PC and turn it off and on again to apply the new settings.
Congratulations! You have successfully installed and used the Motorola CP1660 software on your PC. For more information about the CP1660 radio and its features, you can refer to this specification sheet.
Troubleshooting Tips for Motorola CP1660 Software
If you encounter any problems while using the Motorola CP1660 software on your PC, here are some tips to help you solve them:
Make sure you have the correct USB driver installed on your PC. You can download it from this page. Choose the appropriate driver for your operating system and follow the installation instructions.
Make sure you have the correct programming cable for your radio. You can use either a USB cable or a serial cable, depending on the model of your radio. You can find the compatible cables on this page as well.
Make sure you have the correct firmware version on your radio. You can check the firmware version by turning on your radio and pressing the Menu button. Then scroll to Radio Info and press OK. The firmware version will be displayed on the screen. You can update the firmware using the CPS software if needed.
Make sure you have the correct region code on your radio. The region code determines the frequency range and channel spacing of your radio. You can check the region code by turning on your radio and pressing the Menu button. Then scroll to Radio Info and press OK. The region code will be displayed on the screen. You can change the region code using the CPS software if needed.
If you have any questions or need further assistance, you can contact Motorola Solutions customer support at +44 800 878 2000 or visit this page for more options.
We hope you enjoy using your Motorola CP1660 radio and its software. Thank you for choosing Motorola Solutions. 29c81ba772